12V 16.7A 200W LED Power Supply single output
Switching Power Supply (switch: Power Supply), also known as switching power supply, switching converter, is a high-frequency power conversion device. Switching power supply is the use of modern power electronics technology to control the switch on and off the time ratio, to maintain a stable output voltage of a power supply, switching power supply is generally composed of pulse width modulation (PWM) control IC and MOSFET. Switching power and linear power compared to the cost of both the output power increases with the growth, but the growth rate of the two different. Linear power costs at an output power point, but higher than the switching power supply, which is called the cost of reversal point. With the development and innovation of power electronics technology, switching power supply technology is constantly innovating. Switching power supply to small, lightweight and efficient features are widely used almost all of the electronic equipment, electronic information industry is the rapid development of an indispensable power supply.
For this item, followed are the Features:
1. Universal AC input/Full range
2. Protection: Short circult/Overload/Over Voltage
3. Cooling by free air convection
4. 100% full load burn-in test with 3-5 hours
5. No load power consumption < 0.5W
6. High efficiency, long life and high reliability
7. One year warranty
Details:
Model | S-200-5 | S-200-12V | S-200-24V |
DC Output Voltage | 5V | 12V | 24V |
Iutput Voltage Error | ± 1% | ± 1% | ± 1% |
Rated Output Current | 40A | 16.7A | 8.3A |
Output Current Range | 0-40A | 0-16.7A | 0-8.3A |
Tripple and Noise | 150mVp-p | 250mVp-p | 350mVp-p |
Iniet Stability | ± 0.5% | ± 0.5% | ± 0.5% |
Tolerance Voltage | ± 0.5% | ± 0.5% | ± 0.5% |
DC Output Power | 200W | 200W | 200w |
Efficiency | 82% | 82% | 82% |
Adjustable Range for DC Voltage | 3.8-5.8V | 10-13.2V | 20-26.4V |
AC Input Voltage Range | 90~132VAC/180~264VAC selected by switch 47~63Hz; 240~370VDC |
Input Current | 2.5A/110V 2A/220V |
AC Inrush Current | Cold-Start Current: 25A/115V, 50A/230V |
Leakage Current | <3.5mA/240VAC |
Overload Protection | 105%~150% Type: Cut Output, Reset: Auto Recovery |
Over Voltage Protection | Yes |
High Temperature Protection | Yes |
Temperature Coefficient | ± 0.03% /°C (0~50°C) |
Start, Rise, Hold time | 200ms, 100ms, 20ms |
Vibration | 10~500Hz, 2G 10min,/1cycle, a total of 60 minutes, Each axes |
Withstand Voltage | Between Input and Output: 1.5KVAC, Input and Shell: 1.5KVAC, Output and Shell: 0.5KVAC |
Isolation Resistance | Input and Output Intermal: Input and Enclosule, Output and Enclosure: 500VDC/100M Ohms |
Working Temperature and Humidity | -10°C~+60°C (Refer to Output Dreating Cutive), 20%~90%RH |
Storage Temperature and Humidity | 20°C~+85°C, 10%~95%RH |
Overall Dimension | 145*88*50mm |
Weight | 350g |
EMC Standards | Meet FCC Part 15J Conduction class B |
Please Note:
1. The testing condition for the parameter above is: 230VAC input, rated load, 25°C 70%Rh, Humidity.
2. Error, include the setting error, line stability and load stability.
3. Wave test: adopting "A12" double wire for 20MHZ, and 0.1uF capacitor short-circuit for interrupting.
4. Inlet Voltage Stability test: when is over load, the lowest voltage of inter is representative to the highest voltage.
5. Load stability test: the load is from 0% to 100%, others 60%.
6. C3.4 must be knocked down.
Applications:
•Office , Artwork, Display items lighting;
•Household lighting;
•Commercial lighting, such as Flood light, Down light, Flexible strip light, Wall washer, etc;
•Hotel, Restaurant lighting;
•Other public facility lighting.