Showcase led lighting Power Supply 60w 12v 5a
Switching Power Supply is a voltage conversion circuit, the main work content is boost and buck, widely used in modern electronic products. Essence is an oscillation circuit, this way of converting power, not only in the power supply circuit, in other circuit applications are also common, such as liquid crystal display backlight circuit, fluorescent and so on. Switch source compared with the transformer with high efficiency, good stability, small size, the shortcomings of the power is relatively small, and the circuit will produce high-frequency interference, the circuit is not easy to repair and so on.
For this item, followed are the Features:
1. Universal AC input/Full range
2. Protection: Short circult/Overload/Over Voltage
3. Cooling by free air convection
4. 100% full load burn-in test with 3-5 hours
5. No load power consumption < 0.5W
6. High efficiency, long life and high reliability
7. One year warranty
Details:
Model | S-60-5 | S-60-12V | S-60-24V |
DC Output Voltage | 5V | 12V | 24V |
Iutput Voltage Error | ± 1% | ± 1% | ± 1% |
Rated Output Current | 12A | 5A | 2.5A |
Output Current Range | 0-12A | 0-5A | 0-2.5A |
Tripple and Noise | 150mVp-p | 250mVp-p | 350mVp-p |
Iniet Stability | ± 0.5% | ± 0.5% | ± 0.5% |
Tolerance Voltage | ± 0.5% | ± 0.5% | ± 0.5% |
DC Output Power | 60W | 60W | 60w |
Efficiency | 82% | 82% | 82% |
Adjustable Range for DC Voltage | 3.8-5.8V | 10-13.2V | 20-26.4V |
AC Input Voltage Range | 90~132VAC/180~264VAC selected by switch 47~63Hz; 240~370VDC |
Input Current | 2A/110V 1.5A/220V |
AC Inrush Current | Cold-Start Current: 25A/115V, 50A/230V |
Leakage Current | <3.5mA/240VAC |
Overload Protection | 105%~150% Type: Cut Output, Reset: Auto Recovery |
Over Voltage Protection | Yes |
High Temperature Protection | Yes |
Temperature Coefficient | ± 0.03% /°C (0~50°C) |
Start, Rise, Hold time | 200ms, 100ms, 20ms |
Vibration | 10~500Hz, 2G 10min,/1cycle, a total of 60 minutes, Each axes |
Withstand Voltage | Between Input and Output: 1.5KVAC, Input and Shell: 1.5KVAC, Output and Shell: 0.5KVAC |
Isolation Resistance | Input and Output Intermal: Input and Enclosule, Output and Enclosure: 500VDC/100M Ohms |
Working Temperature and Humidity | -10°C~+60°C (Refer to Output Dreating Cutive), 20%~90%RH |
Storage Temperature and Humidity | 20°C~+85°C, 10%~95%RH |
Overall Dimension | 160*33*40mm |
Weight | 175g |
EMC Standards | Meet FCC Part 15J Conduction class B |
Please Note:
1. The testing condition for the parameter above is: 230VAC input, rated load, 25°C 70%Rh, Humidity.
2. Error, include the setting error, line stability and load stability.
3. Wave test: adopting "A12" double wire for 20MHZ, and 0.1uF capacitor short-circuit for interrupting.
4. Inlet Voltage Stability test: when is over load, the lowest voltage of inter is representative to the highest voltage.
5. Load stability test: the load is from 0% to 100%, others 60%.
6. C3.4 must be knocked down.
Applications:
•Office , Artwork, Display items lighting;
•Household lighting;
•Commercial lighting, such as Flood light, Down light, Flexible strip light, Wall washer, etc;
•Hotel, Restaurant lighting;
•Other public facility lighting.